Powerflow Smart 30L Multipoint Unvented Water Heater 1.0 kW - PF30S1KW

  • Powerflow Smart 30L Multipoint Unvented Water Heater 1.0 kW - PF30S1KW
  • Powerflow Smart 30L Multipoint Unvented Water Heater 1.0 kW - PF30S1KW

Powerflow Smart 30L Multipoint Unvented Water Heater 1.0 kW - PF30S1KW

Suitable for hand washing and dish washing where a number of hot water outlets are required such as kitchens, schools, restaurants, washrooms, healthcare environments and offices. The ideal solution for light industrial, commercial and light domestic hot water requirements.

Price Matching Service

Found it cheaper? Try our price matching service!

We are confident that our prices are the lowest in the business, however if you do find the same product cheaper elsewhere, please let us know and we will be happy to price match.

  • Product Code:PF30S1KW
£379.60 + VAT
£455.52 inc VAT
Payment Cards Payment Stripe
Price Matching Service

Found it cheaper? Try our price matching service!

We are confident that our prices are the lowest in the business, however if you do find the same product cheaper elsewhere, please let us know and we will be happy to price match.

Suitable for hand washing and dish washing where a number of hot water outlets are required such as kitchens, schools, restaurants, washrooms, healthcare environments and offices. The ideal solution for light industrial, commercial and light domestic hot water requirements.

Features
  • Slender slimline design
  • Mains pressure flow rates
  • Smart technology gives high energy efficiency
  • Three modes of operation, standard, smart and eco
  • Eco mode at 50°C
  • Erp ratings A 30L, B 50, 80 and 100L
  • Can be used with regular taps, including mixers
  • 3.0 kW element for fast heat up time
  • 1.0 kW element available for restricted load applications
  • Neon element on indicator
  • Patented technology ensures incoming cold water does not immediately mix with stored hot water in the tank making more hot water available
  • External electronic temperature control
  • Glass lined tank, 3 year tank warranty
  • Comes complete with unvented accessory kit
  • Optional thermostatic mixing valve available
  • Wall mounted, connections to the base
  • Cable pre-wired (1.5m)
Technical

Outer Casing
White powder coated steel

Heating Element
Stainless steel incoloy

Thermostat
Electronic 30 - 70°C

Water Tank
Glass lined steel

Anode
Replaceable grey magnesium anode (inspect at least annually or more regularly in scale/ aggressive water conditions)

Insulation
High density polyurethane foam (CFC free)

Safety
Overheat temperature protection (manual reset).
Factory fitted temperature and pressure relief valve (set at 7 bar 90°C).
Pressure reducing valve (set at 3 bar).
Pressure relief valve at 6 bar.
Use with a thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature.

IP Rating
IPX4

Installation
Must be wall mounted vertically with inlet/ outlet connections at base.
Allow at least 500mm below and 200mm above the heater to facilitate future maintenance.
Access to the thermal cut-out and element is located at base of unit.

Unvented Accessory Kit
Supplied kit must be fitted.
Contains expansion vessel with fixing bracket (5L for PF30S & PF50S, 8L for PF80S & PF100S**), inlet group, flexible hose and 2 tundishes.

Plumbing
Must be installed by a suitably qualified person.
Minimum water pressure 1 bar.
Maximum water pressure to pressure reducing valve 12 bar.
Working water pressure 3 bar.

Water Connection
Inlet/outlet connection 1/2” BSP male. (100mm apart centre to centre)
Fittings required (not supplied): 2 x 15mm compression to 1/2” BSP female adapter.

Electrical Connection
Installation must comply with current IET regulations.
The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with a contact separation of at least 3mm in all poles.

Approvals
CE, KIWA, Building Regulations

Standard Warranty
1 year parts or replacement warranty on electrical components.
3 year tank warranty.

Data Tables

Product Data

Capacity (litres)Power (kW)Heat Up Time (mins)*Standing Loss (kWh/day)
301.0740.31

Product Size

Height (mm)Width (mm)Depth (mm)Weight Empty (kg)Weight Full (kg)
5423803961444
 Logo

© BoilersAndTaps.co.uk2024.

E-Commerce Website by Twilo Creative