Powerflow Smart 30L Multipoint Unvented Water Heater 3.0 kW - PF30S

Outer Casing
White powder coated steel

Heating Element
Stainless steel incoloy

Thermostat
Electronic 30 - 70°C

Water Tank
Glass lined steel

Anode
Replaceable grey magnesium anode (inspect at least annually or more regularly in scale/ aggressive water conditions)

Insulation
High density polyurethane foam (CFC free)

Safety
Overheat temperature protection (manual reset).
Factory fitted temperature and pressure relief valve (set at 7 bar 90°C).
Pressure reducing valve (set at 3 bar).
Pressure relief valve at 6 bar.
Use with a thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature.

IP Rating
IPX4

Installation
Must be wall mounted vertically with inlet/ outlet connections at base.
Allow at least 500mm below and 200mm above the heater to facilitate future maintenance.
Access to the thermal cut-out and element is located at base of unit.

Unvented Accessory Kit
Supplied kit must be fitted.
Contains expansion vessel with fixing bracket (5L for PF30S & PF50S, 8L for PF80S & PF100S**), inlet group, flexible hose and 2 tundishes.

Plumbing
Must be installed by a suitably qualified person.
Minimum water pressure 1 bar.
Maximum water pressure to pressure reducing valve 12 bar.
Working water pressure 3 bar.

Water Connection
Inlet/outlet connection 1/2” BSP male. (100mm apart centre to centre)
Fittings required (not supplied): 2 x 15mm compression to 1/2” BSP female adapter.

Electrical Connection
Installation must comply with current IET regulations.
The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with a contact separation of at least 3mm in all poles.

Approvals
CE, KIWA, Building Regulations

Standard Warranty
1 year parts or replacement warranty on electrical components.
3 year tank warranty.